October 18, 2018
AUSTIN, Texas, October 16, 2018 (Newswire.com) – VUV Analytics, Inc., pioneers in developing lab scale vacuum ultraviolet based analytical instruments, today announces the release of VUVision 3.0 Data Analysis Software. VUVision Data Analysis Software simplifies GC analysis by providing an intuitive interface for analyte characterization...
September 25, 2018
Peter Boler Joins VUV Analytics as Vice President of Marketing Austin, TX – September 25, 2018 –VUV Analytics, Inc., the leader in vacuum ultraviolet (VUV) absorption spectroscopy, has announced the addition of Peter Boler as Vice President of Marketing. Mr. Boler brings strategic, cross-functional, and market...
The Gulf Coast Conference is a non-profit organization for the advancement of knowledge in Chemical Analysis Technology associated with Petrochemical, Refining, and Environmental fields. Visit VUV Analytics at booth #521.
Quantification of the Composition of Liquid Hydrocarbon Streams: Comparing the GC-VUV to Established Methods by Bill Winniford, Dow Inc.
October 15th 9:30am – 10:00am in Exhibit Hall A4
Commercialization of GC-VUV instrumentation has afforded a new technique for the quantification of the hydrocarbon composition of samples. The gas-phase absorbance of hydrocarbons from 125 – 240 nm is sensitive to differences in compound classes as well as the small differences in positional isomers. This allows for the identification and quantification in a PIONA-like fashion based on the UV spectra when the VUV PIONA+ software is utilized. In Dow, the hydrocarbon composition of liquid hydrocarbon streams between C5 to C15 are typically evaluated using a detailed hydrocarbon analysis (DHA) or a GCxGC-FID analysis. The DHA analysis relies on a 1D GC-FID method, and while the FID is a universal detector, it is unable to provide identifications without appropriate analytical standards. Therefore, if peaks are closely eluting, or even co-eluting in the DHA method, identification, and thus, accurate quantitation can suffer. GCxGC coupled to FID detection can provide additional separation, which can reduce or eliminate the co-elutions observed by DHA; however, as with the DHA, identifications are not possible without appropriate analytical standards. This presentation will focus on the comparison of liquid hydrocarbon streams analyzed using both the DHA and GCxGC-FID methods compared to GC-VUV for hydrocarbon composition, with the emphasis being placed on the VUV’s enhanced accuracy of the group identification and quantification.
Using GC-VUV to Detect Methanol, FAME (Ester) Total, and Linolenic Acid Methyl Ester in 100% Biodiesel by James A. Diekmann, VUV Analytics
October 15th 9:45am — 10:05am in Wisteria Room
The popularity and interest in biodiesel are growing significantly in many areas of the world as an alternative for automobile fuels. Biodiesel is produced through the transesterification of vegetable oils and animal fats, producing fatty acid methyl esters (FAMEs), which requires a different set of standardized methods for quality control. EN-14103 and EN-14110 determine ester and methanol content using flame ionization detection. This study uses gas chromatography vacuum ultraviolet spectroscopy to identify and quantity the FAMEs and methanol content in 100% biodiesel, providing an extra degree of certainty through spectral identification, unlike conventional techniques that solely rely on retention time.
Fast Analysis of Middle Distillates using Gas Chromatography-Vacuum Ultraviolet Spectroscopy by Alex Hodgson, VUV Analytics
October 15th 2:45pm – 3:15pm in Wisteria Room
Middle distillates like jet fuel and diesel have strict requirements regarding aromatic content to reduce pollution and maximize engine life. The current referee method, ASTM D1319, is becoming unsustainable as remaining dye stocks wane. Current alternative methods include supercritical fluid chromatography (SFC) and high-performance liquid chromatography (HPLC).
Vacuum ultraviolet (VUV) spectroscopy is a relatively new GC detection methodology that can analyze jet fuel in less than 14 minutes and diesel in less than 20 minutes. Automated quantitation using time interval deconvolution (TID) can determine total mono- and di-aromatics for jet fuel and total mono-, di-, tri-, and tetra-aromatics for diesel.
Seminar: ASTM D8071 and Verified Hydrocarbon Analysis: Automating complex hydrocarbon analyses with GC-VUV by Dan Wispinski, VUV Analytics
October 16th 8:50am – 9:10am in Iris Room
Standard method ASTM D8071 provides an automated, fast, and accurate approach to complete compound class characterization of paraffins, isoparaffins, olefins, napththlenes, and aromatics (PIONA) in finished gasoline, while also providing ASTM D6708 equivalency data for ASTM D5769, ASTM D1319, ASTM D3606, and ASTM D5599. Arising from ASTM D8071 is Verified Hydrocarbon Analysis™ (VUV-VHA™) which employs both retention time and spectral information to speciate compounds commonly found in gasoline, while fully characterizing the paraffin, isoparaffin, olefin, naphthene, and aromatic (PIONA) group composition of samples in a 49-minute automated analysis.
Seminar: The Future of Fuels Analysis: Jet Fuel (ASTM D8267) and Diesel Analysis by Dan Wispinski, VUV Analytics
October 16th 9:30am – 10:00am in Iris Room
A new ASTM standard test method has been developed to provide a suitable alternative to D1319 and ASTM D1840. In the jet fuel range, mono-aromatics and diaromatics all have distinct VUV absorbance spectra which allow them to be deconvolved from one another in a complex matrix. The GC-VUV method ASTM D8267 can analyze jet fuel in a 14-minute run and a 60-second automated quantitation, reporting total aromatics, monoaromatics, and diaromatics, addressing the challenges faced with ASTM D1319 & ASTM D1840. Also capable of analyzing biodiesel and aromatic content in diesel fuels, the VUV Analyzer™ Platform is a powerful solution with the ability to run different types of fuels and different methods all without changes to hardware or set up, reducing the overall runtime, automating analysis and reducing the cost per sample.
Harmful Chemicals in Gasoline — A European Perspective by Dan Wispinski, VUV Analytics
October 16th 1:15pm – 1:40pm in Jasmine Room
In Europe, CEN/TC 19 WG21 has initiated a new work item for a technical report and possible revision to EN228 addressing “harmful chemicals” in petrol. The chemical compounds addressed by CEN specifically are sec- butyl acetate, aniline and its derivatives such N-Methylaniline, N-Ethylaniline and di-Methylaniline. This paper will describe the European initiative and implications for other jurisdictions. A simple modification of the VUV Analyzer platform using ASTM D8071 is presented allowing a fast, automated screening of these harmful chemicals.
Hydrogen and Nitrogen as Carrier Gas Alternatives to Helium: Gas Chromatography-Vacuum Ultraviolet Spectroscopy of Hydrocarbon Groups and Select Compounds in Gasoline-Range Samples by Ryan Schonert, VUV Analytics
October 16th 2:45pm — 3:15pm in Jasmine Room
ASTM D3606 (benzene), ASTM D5599 (ethanol, oxygenates), and ASTM D5769 (benzene, toluene, total aromatics) gasoline tests typically require three dedicated GC systems, all using helium carrier gas, which is in short supply. ASTM D8071-17, PIONA and oxygenates analysis with gas chromatography – vacuum ultraviolet spectroscopy (GC-VUV), allows benzene, toluene, total aromatics, and ethanol, as well as other parameters, to be accomplished on one GC in less than 35 min.
Helium use can be eliminated entirely by employing alternate GC carrier gases, such as hydrogen and nitrogen. This presentation will demonstrate how using GC-VUV for the analysis of gasoline-range samples.
For more information about the event, please visit Gulf Coast Conference. If you’re interested in obtaining one of the above presentations, please email info@vuvanalytics.com.
VUV Analytics will be an exhibitor at this year’s Eastern Analytical Scientist event — which is being held at a new location, the Crowne Plaza Princeton-Conference Center in Plainsboro Township, NJ.
VUV Analytics will be in Booth #WF1-2 in the Waterfront Room on the second floor. And be sure to check out our partner Shimadzu at #WF1-7.
Learn more about the event and the full technical program here.
ASTM D02 — Petroleum Products, Liquid Fuels and Lubricants is set to meet in December 2019, for it’s second meeting of the year. This is where VUV Analytics will have updates on all ASTM Fuel methods, including:
Detailed hydrocarbon analysis (DHA) has long been the go-to method of choice when it comes to robust analysis of various hydrocarbon streams. Consisting of a 100-meter column and a flame ionization detector, DHA necessitates long run times and a level of expertise to obtain results with confidence. Even with skilled analysts, results can often be misinterpreted due to the complexity of hydrocarbon streams and the only data point captured being retention time.
To address the concerns and challenges faced with DHA, VUV Analytics™ had developed a new application for the VUV Analyzer™ Platform for Fuels called Verified Hydrocarbon Analysis™ (VHA). VHA employs both retention time and vacuum ultraviolet (VUV) spectral information to speciate compounds commonly found in hydrocarbon streams, while fully characterizing the paraffin, isoparaffin, olefin, naphthene, and aromatic (PIONA) group composition of samples in a 49-minute automated analysis. VHA analysis will be demonstrated and compared to DHA in terms of performance, results, and total cost of analysis. This webinar will also introduce the VUV Analyzer Platform, which can also be used to run ASTM D8071 for gasoline analysis and ASTM D8267 for jet fuel analysis. Also, it will provide important details on accuracy, precision, and how laboratories can reduce analysis time and cost using this platform.
Key learnings:
Speakers:
Alex Hodgson, Acting Applications Manager, VUV Analytics
Alex is the Acting Applications Manager at VUV Analytics, Inc. His current research focuses on fuels analysis, specifically the ASTM D8267 jet fuel method and the diesel method. He was also instrumental in the creation of vacuum ultraviolet applications for the flavor and fragrance industries, among a variety of other VUV-related endeavors. Prior to coming to VUV Analytics, Alex was a member of the Center for Disease Control’s team in Atlanta, where his research was on tobacco exposure biomarkers. He earned a B.S. in biochemistry from the University of Texas at Austin and an M.S. in biochemistry at the Georgia Institute of Technology.
Dan Wispinski, Standard Methods Development Manager, VUV Analytics
Dan is the Standard Methods Development Manager for VUV Analytics. In the 2 years Dan has been with VUV, he has been instrumental in the development and publication of ASTM D8071 for gasoline and soon to be published ASTM D8267 jet fuel. Dan’s tenure with multiple international standards boards has helped VUV complete the InterLaboratory Studies for each method in record time. Prior to joining VUV Analytics, Dan managed one of Canada’s top fuel testing research labs, InnoTech Alberta, formerly Alberta Research Council. Dan has over 36 years of experience in refined fuel specifications, biofuels, crude oil and bitumen. He is chairman of the Canadian General Standards Board Petroleum Test Methods Committee and an active member of ASTM, CGSB, IASH, CEN and the Energy Institute Working Group 6.